How do You Repair a Well Pump?

water pumpDo you live on an isolated property with the sole source of water being a well? If so, you know the importance of having a dependable and fully functioning well pump to provide clean, potable water. But what happens when your pump fails or needs repair? What do you need to know in order to get it back up and running again? In this blog post, Wildheron Drilling experts will explore how to diagnose and repair common issues with well pumps, both large commercial units as well as smaller residential models. From understanding how they work and diagnosing problems through plan selection and installation instructions, this is your complete guide for getting your water pumping again!

Gather the appropriate tools and materials for the well pump repair

When it comes to repairing something, having the right tools and materials at your disposal is crucial. Without them, you’ll find yourself running back and forth to the store, making it difficult to get the job done efficiently. To gather the appropriate tools and materials for the repair, take inventory of what you already have and then make a list of what you need.

The most important tool needed to repair a well pump is the right-sized wrench set, as this will allow you to access components and make any adjustments that may be necessary in order to get the job done. You’ll also need a voltmeter or multimeter to check for proper power flow and voltage, pliers for loosening or tightening connections and clamps, a bucket to collect any liquids that may escape during the repair process, wire cutters for splicing wires or cutting them off completely, and a few other items depending on the specific problem you are addressing.

Perform an inspection and diagnosis of the well pump

Before making any repairs to your well pump, it’s important to perform a thorough inspection and diagnosis in order to identify the exact cause of the issue. If there is no visible damage or obvious signs of wear and tear, then a diagnostic test may be necessary. This will involve running a series of tests on electrical components such as relays, switches, and wires to make sure everything is functioning properly. Additionally, a pressure test should be performed in order to check the actual pump performance.

ground water pump

Shut off power to the pump and open the pressure tank

Once you’ve identified the issue and gathered the necessary tools and materials, you are ready to begin the repair process. Before doing anything else, however, it is important to shut off the power to the pump in order to prevent any electric shock or other hazards. After that, open up the pressure tank so that you can access all of the components inside.

Unscrew any bolts or screws that are holding the pump together

Once you have the pressure tank open, unscrew any bolts or screws that are holding the pump together in order to gain access to all of its parts. Make sure that you keep track of where each one goes as this will save you time and energy when it comes time to reassemble the unit.

Clean off any dirt, rust, or sediment from the pump

Nothing is worse than a malfunctioning pump, especially when it’s due to dirt, rust, or sediment buildup. Luckily, taking the time to clean off any of these intruders from your pump can save you from unnecessary headaches down the line. Don’t let these unwanted culprits damage your pump’s ability to perform at its best. With just a little bit of elbow grease, you can easily remove anything that’s getting in the way and get your pump back to its peak efficiency.

Replace any malfunctioning components and get the well pump back up and running

Once you’ve identified the problem, it’s time to begin repairs. If a certain component or part has malfunctioned and needs to be replaced, make sure to find a high-quality replacement that is specifically designed for your particular model. After the new parts have been installed and all Connections have been checked and tightened, it’s time to get the well pump up and running again. Make sure to follow all relevant safety instructions while testing for proper performance, and if you encounter any issues then consider consulting with a professional who can better assist you.

If your well is not functioning properly and then in many cases, the well pump is the culprit. Read this guide regarding well repair

After following these steps, your well pump should once again be functioning properly and running smoothly. It’s important to remember that any repairs done to a well pump require the proper tools and materials, so it may help to speak with an expert such as WildHeron Drilling in order to ensure you have everything you need before beginning the process. However, with a little effort and care, you can bring your well pump back to life- regardless of whether it is an old workhorse or a newfangled modern marvel.

5+ Signs of Well Pump Failure

pumping for waterIf you rely on a well pump to deliver water to your home or water services for farms, then recognizing the signs of well pump failure is essential. Without proper maintenance and quick repair, an inoperable pump can mean no running water in your house. While it’s easy to overlook problems when everything appears normal up top, paying attention to any changes that could indicate an issue developing beneath the surface can help you nip major issues in the bud before they spiral out of control—and save yourself money and a world of trouble down the road. To arm yourself with useful knowledge about how and why pumps fail, read on for our comprehensive guide on what kind of signs warn about impending pump troubles and ways to get back up and running as soon as possible if something does go wrong!

Loss of water pressure

Experiencing a loss of water pressure can be quite disconcerting, especially when it occurs unexpectedly or gradually over time. One of the potential culprits behind this issue could be a problem with your well pump.

A well pump is responsible for supplying water to your home, and any malfunctions can lead to inconsistencies in water pressure. When you encounter such an issue, it is essential to act swiftly and seek professional help to diagnose and resolve the matter.

Addressing the problem at an early stage can prevent further damage and costly repairs in the long run, and help maintain the overall quality of your water supply. Remember; a well-maintained well pump is crucial for ensuring consistent water pressure and an uninterrupted flow of fresh water to your home.

Loud noises coming from the pump 

The cacophony of loud noises emanating from a pump can be quite unsettling and may signal an issue that requires prompt attention.

There are a couple of potential culprits behind this auditory annoyance: the motor may be wearing out, or something could be obstructing its proper functioning. A worn-out motor not only diminishes the pump’s efficiency, but also risks causing further damage if left unaddressed.

On the other hand, an obstruction in the system can trigger a myriad of issues, ranging from reduced water flow to a complete pump failure. Taking swift action to assess and resolve the underlying problem is key to restoring tranquility and ensuring the longevity of your pump.

well pump for farming
Leaks around the pump 

Discovering moisture or liquid around your well pump can be quite concerning, as it may be an indication that a replacement is needed in the near future.

This issue should not be taken lightly, as leaks can potentially lead to significant damage and costly repairs if left unaddressed. It is essential to carefully monitor the area for any signs of deterioration or worsening of the problem.

Consulting with a professional and scheduling an inspection can help ensure that your well pump remains in optimal condition and prevent any unwarranted disruptions to your water supply.

In the end, taking the necessary precautions will ultimately contribute to the longevity of your well pump, allowing you to enjoy a reliable and efficient water system in your home.

Unusual electricity usage 

Have you recently noticed a sudden increase in your electricity bills without any significant changes to your daily routine? Believe it or not, the culprit of such unusual electricity usage might lie deep underground – it could be a failing well pump.

Well pumps are responsible for drawing groundwater into your home, but with time, they may develop faults or suffer wear and tear. A malfunctioning well pump has to work harder and consume more electricity to deliver the same amount of water, resulting in a spike in your bills.

To prevent further damage and avoid the burden of escalating energy costs, it’s crucial to keep an eye on your electricity usage patterns and address any unexpected changes promptly.

Don’t hesitate to call in a professional to inspect and ensure the optimal functioning of your well pump, potentially saving you from a pricey headache down the road.

Poor water quality 

The issue of poor water quality is a significant concern for many, especially if there are signs of contamination in your water supply.

This could be an indicator that your well pump is malfunctioning, putting the health and well-being of you and your family at risk. Not only does this have the potential to affect your everyday activities like cooking, bathing, and cleaning, but it can also lead to long-term health issues due to the consumption of contaminated water.

It’s essential to address this problem promptly by seeking the help of a professional to assess and get them for your well pump repair, ensuring a safe and healthy water supply for your home. By taking these preventative measures, you are contributing to the welfare of both your household and the environment.

Dry wells

when you notice that water is not coming out of your tap as readily as before, it could be due to the failure of the well pump. A failing well pump is often the culprit behind reduced water pressure in your home.

When you notice that your faucet is no longer running as strongly as before, it could be a sign that the well pump has stopped working properly. If you suspect your home may be relying on a dry well, have a professional confirm if the problem lies with the well and if it needs repairs or to be replaced.

In either case, the cause of the problem and how to fix it should become known so you can return to enjoying plentiful supplies of household water.


Well pumps are an essential part of your home’s plumbing system, providing a reliable source of clean and safe water. To ensure that your well pump remains in optimal condition, it is important to keep an eye out for signs of trouble such as sudden rises in electricity bills, poor water quality, or dry wells. If any such issues arise, address the problem promptly by having a professional inspect and repair your well pump. Taking these necessary steps will help to guarantee an uninterrupted water supply for your home, while also contributing to a healthier environment.